آموزش کاملPowerPoint 2010 -EN

[A M I R]

[h=2]Animating Text and Objects

[h=4]To Apply an Animation to an Object:




Select an object.

Click the Animations tab.

In the Animation group, click the More drop-down arrow to view the available animations.

Select the desired animation effect.

The object will now have a small number next to it to show that it has an animation. Also, in

the Slide pane, the slide will now have a star symbol next to it.

At the bottom of the menu, you can access even more effects.

​

 

[A M I R]

[h=2]Animating Text and Objects

[h=4]Effect Options
Some effects will have options that you can change. For example, with the Fly In

effect, you can control which direction the object comes from. These options can

be accessed from the Effect Options command in the Animation group.

​

 

[A M I R]

[h=2]Animating Text and Objects

[h=3]Working with Animations [h=4]To Add Multiple Animations to an Object:

If you select a new animation from the the menu in the Animation group, it will replace the object's

current animation. However, you'll sometimes want to place more than one animation on an

object, for example an Entrance and an Exit effect. To do this, you'll need to use the Add Animation

command, which will allow you to keep your current animations while adding new ones.




Select the object.

Click the Animations tab.

In the Advanced Animation group, click the Add Animation command to view the available animations.

Select the desired animation effect.

If the object has more than one effect, it will have a different number for each effect. The numbers indicate the order in which the effects will occur.

​

 

[A M I R]

[h=2]Animating Text and Objects

[h=4]To Copy Animations with the Animation Painter:

In some cases, you may want to apply the same effects to more than one object. You can

do that by copying the effects from one object to another using the Animation Painter.




Click on the object that has the effects that you want to copy.

From the Animations tab, click the Animation Painter command.

Click on the object that you want to copy the effects to. The effects will be applied to the object.

 

[A M I R]

[h=2]Animating Text and Objects

[h=4]To Reorder the Animations:

Select the number of the effect that you want to change.

From the Animations tab, click the Move Earlier or Move Later commands to change the ordering.

​

 

[A M I R]

[h=2]Animating Text and Objects

[h=4]To Preview Animations:

Any animation effects that you have applied will show up when you play the slide show. However, you

can also quickly preview the animations for the current slide without viewing the slide show.




Navigate to the slide that you want to preview.

From the Animations tab, click the Preview command. The animations for the current slide will play.

 

[A M I R]

[h=2]Animating Text and Objects

[h=3]The Animation Pane
The Animation Pane allows you to view and manage all of the effects that are on the

current slide. You can modify and reorder effects directly from the Animation Pane, which

is especially useful when you have a large number of effects.





​

 

[A M I R]

[h=2]Animating Text and Objects

[h=4]To Open the Animation Pane:
From the Animations tab, click the Animation Pane command.

The Animation Pane will open on the right side of the window. It will show all of the effects for the current slide in the order that they will appear.

​

 

[A M I R]

[h=2]Animating Text and Objects

[h=4]To Reorder Effects from the Animation Pane:

On the Animation Pane, click and drag an effect up or down.

The effects will reorder themselves.
​

 

[A M I R]

[h=2]Animating Text and Objects

[h=4]To Preview Effects from the Animation Pane:

From the Animation Pane, click the Play button.

The effects for the current slide will play. On the right side of the Animation Pane, you

will be able to see a timeline that shows the progress through each effect.

If the timeline is not visible, click the drop-down arrow for an effect and select Show Advanced Timeline.

​

 

[A M I R]

[h=2]Animating Text and Objects

[h=4]To Change an Effect's Start Option:



By default, an effect starts playing when you click the mouse during a slide show. If you have multiple

effects, you will need to click multiple times to start each effect individually. However, by changing the

start option for each effect, you can have effects that automatically play at the same time or one after the other.




From the Animation Pane, select an effect. A drop-down arrow will appear next to the effect.

Click the drop-down arrow. You will see three start options:

• Start on Click: This will start the effect when the mouse is clicked.
• Start With Previous: This will start the effect at the same time as the previous effect.
• Start After Previous: This will start the effect when the previous effect ends.

Select the desired start option.

When you preview the animations, all of the effects will play through automatically. To test effects that are set to Start on Click, you will need to play the slide show.

​

 

[A M I R]

[h=2]Animating Text and Objects

[h=3]The Effect Options Dialog Box



From the Animation Pane, you can access the Effect Options dialog box, which contains more

advanced options that you can use to fine-tune your animations.

​

 

[A M I R]

[h=2]Animating Text and Objects

[h=4]To Open the Effect Options Dialog Box:

From the Animation Pane, select an effect. A drop-down arrow will appear next to the effect.

Click the drop-down arrow and select Effect Options. The Effect Options dialog box will appear.

From here, you can add various enhancements to the effect:

• Sound: Adds a sound effect to the animation.
• After animation: Changes the color or hides the object after the animation is over.
• Animate text: If you are animating text, you can choose to animate it all at once, one word at a time, or one letter at a time.

Some effects have additional options that you can change. These will vary depending on which effect you have selected.

​

 

[A M I R]

[h=2]Animating Text and Objects

[h=4]To Change the Effect Timing:


From the Effect Options dialog box, select the Timing tab.

From here, you can add a delay before the effect starts, change the duration of the effect, and control whether or not the effect repeats.

​

 

[A M I R]

[h=2]Animating Text and Objects

[h=3]Challenge!

Open an existing PowerPoint presentation. If you want, you can use this example.


Add an entrance effect to an object. If you are using the example, use one of the objects on Slide 3.


Use the Animation Painter to copy the effect to another object.


Use the Animation Pane to reorder the effects.


Experiment with different start options and timings.


Add two additional effects to one of the objects.


​

 

[A M I R]

[h=2]Inserting Videos

[h=3]Introduction

Videos are a great way to make your presentations more engaging for your audience. PowerPoint allows you to insert

a video from a file on your computer or from a web site such as YouTube. You can even edit the video within

PowerPoint and customize its appearance with a Video Style.


In this lesson, you will learn how to insert a video, edit it, and format its appearance.

​

 

[A M I R]

[h=2]Inserting Videos

[h=4]To Insert a Video from a File on Your Computer:




From the Insert tab, click the Video drop-down arrow and select Video from File.

Locate and select the desired video file and then click Insert.

The video will be added to the slide.

​

 

[A M I R]

[h=2]Inserting Videos

[h=4]To Insert a Video from a Web Site:

Some web sites, like YouTube or Hulu, allow you to embed videos in a blog, ******** profile, or

other web page. In PowerPoint, you can embed videos in your slides in the same way. This feature

only works with web sites that provide embed code, and the embed code from some sites may not work with PowerPoint.




On the web site that contains the video (YouTube, for example), locate and copy the embed code.

In PowerPoint, click the Insert tab.

Click the Video drop-down arrow, and select Video from Web Site.

In the space provided, right-click and select Paste. The embed code will appear.

Click Insert. The video will be added to the slide.

 

[A M I R]

[h=2]Inserting Videos

[h=3]Working with the Video[h=4]To Preview the Video:

Make sure the video is selected.

Click the Play/Pause button below the video. The video will start playing, and the timeline next to the Play/Pause button will begin to advance.

To jump to a different part of the video, click anywhere on the timeline.

If you are using an embedded video from a web site, you may need to click the Play button

in the Playback tab in order to view the video's playback controls (the Play button is also located on the Format tab).


​

 

[A M I R]

[h=2]Inserting Videos

[h=4]To Resize the Video:
Select the video. A box with resizing handles will appear around the video.

Click and drag any of the handles to resize the movie.